Wall Mounted Shower Caddy with Accessory Hooks

Enjoy this fun project of creating a convenient shower caddy!

All parts print support-free in the orientation you download them in. 

---------------------------------------------------------------------------------

Material

This can be made with PLA, but if it's going to get continuous hot water directly showered onto it, then you may want to consider a plastic that can take hotter temperatures like PETG.

Assembly

The two stalk parts can be superglued together and to the main basket. I also superglued the stalk support to cover both joins, and it adds a nice two-toned color flair. 

The wall mounted hook is screwed into the wall above the shower. I used screws because I personally have bad luck with mounting tape, but by all means give it a try if you have more faith. The length of the stalk is a little over 12in (~31cm). 

The razor holder is glued to the base of the basket, but the other hooks can just fall between the grated slots and hang by the wings. They are easily removable/movable. 

There is also a slot on the left side that can be used for a number of different things. 

---------------------------------------------------------------------------------

Let me know what you think and share your make!