Circular Small Parts Box (with Fusion360 sources)

This is another small parts organizer. You rotate the lid to access particular compartment. You have to make a “window” circle from any firm foil. For example lamination foil, foil from a doll or car box etc…

Box is designed to be as parametric as possible, you should be able to adjust diameter, depth and count of compartments pretty easily. Check the user parameters window in Fusion360. 

Model was printed on Prusa MK3+ with 0.6mm nozzle. It could be little bit sensitive to printer tolerances, because lid is using the groove on the perimeter to hold. You can change dimensions of this part of the component in the sketch “LidGroove”