Double Desert Eagle for Flexi-Rex [V2]

My Flexi-Rex Collection: 

https://www.printables.com/de/@LockeDerBoss_86143/collections/1151181

________________________________________________________________________________________________________________

I had to rework the base model https://www.printables.com/de/model/46241-flexi-rex-with-stronger-links (the sky-blue Rex in pictures), so his stance is more upright.

https://www.printables.com/de/model/708237-less-flexi-rex (copper-like Rex)

I didn't change anything else, so the add-on also works with other Flexi-Rex models, when there was nothing changed on the hands or the chin.

You can clip-on the DEs. If not, scale up/down the model by 0.5% or so and try again.

Mine worked fine, but i also printed on a scale of 125% using a 0.4mm nozzle and 0.15mm layer height with PLA.

…meanwhile i printed them on 125% and 150%, still using a 0.4 nozzle, but I found my 0.25 nozzles :) :) :) 

I hate printing small stuff like that with a 0.4 nozzle.

250% and 300% coming soon, too.

I'll drop some pictures when im done.

______________

V2 (Feb. 12th 2024)

Changes:

• some corners rounded/beveled
• .no_50AE version added
• gun-barrel cut much deeper (no picture)
• “side-holes” not cutting through the barrel anymore
• 3 side-holes, a little bigger, instead of 4
• a little tweak on the “5”
• grip-orientation changed (he's shooting a little straighter now)
• …maybe you find some more…

A little hint for people that use Prusa-Slicer profiles: Turn off Arachne Perimeter-Generator. YES! (ignore, if printing on 180-200%+)

Maybe also turn off Elephant Foot Compensation :)

The models are the same (150%). It's 2x left and 2x right, once with and once without .50AE

Edit: 

One more hint (Thanks @sopryshko):

Had to enable "Detect thin walls" in the slicer to print them properly

no change