Kindle Paperwhite 5th (11th gen) case

I printed it from PLA, and it is a tight fit, but it works. I'm also planning on printing it in ABS too, because it is less rigid. TPU would be the best, but I don't have that for now.

I recommend drastically reducing printing speed during first layer (5-10mm/s), because for me, higher speeds messed up the hexagons. 

Printer: Prusa MINI+
Layer height: 0.15mm
No support, no brim
Temp: 205/200 C

thingiverse link: https://www.thingiverse.com/thing:6418503