TCG Card Display Frame

A 3D printable frame to display your standard size TCG cards like Magic: The Gathering, Pokemon, Yugioh, Lorcana, etc. in a magnetic card holder. I wanted a way to display my MTG Princess Bride Secret Lair foils in my office, so I created this hangable display frame to showcase the cards in magnetic card holders. Simply place your card into a card holder, then slip the holder into the slot on top of the frame. It's easy to slide the card holder out of the frame if you want to replace the card you have on display. Each frame has a triangular cutout on the back side to hang the frame from a nail.

This frame has been tested with Ultra Pro 35-Point ONE-Touch Magnetic Trading Card Holders (https://www.amazon.com/dp/B073G9MZSZ?psc=1&ref=ppx_yo2ov_dt_b_product_details) and BCW 35-Point Magnetic Card Holders (https://www.amazon.com/gp/product/B01770EDDA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1). It may work with other thick card holders, but these are the one's I've used with it, so your milage may vary with other styles of card holders.

The frame can be printed vertically without supports, so long as you use material that can bridge well for the top of the frame; otherwise, simply use supports for the top span of the frame. I printed these in high-speed PLA at 0.16 mm layer height, 15% gyroid infill, and 3 perimeters, no supports and no brims.

I have included files for frames that can accommodate 1, 2, 3, 4, or 5 cards. The 3-card version will fit diagonally, corner-to-corner, on a Bambu P-Series, or X-Series printer. The 4 and 5-card versions are supplied if you're lucky enough to have access to a larger format printer.