Bambu Lab Infill Swatches

Infill swatches for display of what possible infills are available for each print.

Printer: Bambu Lab X1 Carbon

Infill: 20%

Nozzle: 0.4mm

Layer height: 0.2mm

Filament: MatterHackers MH Build Series PLA Yellow

All were printed on the 256mm x 256mm bed of the X1 Carbon in one print. All can fit on the build plate.

If you do not use the gcode and want to slice it yourself, then make sure to remove all top layers. This will allow for the display of the infill.