Dummy 13 Weapons Pack V3.1 (Halo / Sci-Fi Inspired Weapons)

Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too.

This Weapons Pack has been updated to version 3.1 with the following changes:

• New SMG added
• Redesigned handles

Since the Halo Dude was getting a bit jealous of the small arsenal (pardon the pun) that my other Dummy 13 figures can pick from, I decided to give it a few choices.  This Weapons Pack v3.0 is Halo/Sci-Fi inspired, and includes a rifle, shotgun, pistol and machete in a card kit format.  If you don't need the card kit, a model without the sprues is also included.

These models are designed to print without supports, though some minor bridging is needed.  I printed these using a 0.4mm nozzle and 0.1mm layer height, with no supports.  You can also use adaptive layers, which may help further with resolving some of the finer details.

The rifle and pistol require some assembly, but glue should be optional.  The parts on the rifle are also a very close fit, so calibrating flow is a good idea before running those parts.  On the rear pad, there is a V shaped notch which points to the front, which will help to install it correctly (that part just snaps into place).  The rifle goes together as shown in the pic below:

This pistol goes together as shown below:

The SMG's have a collapsible stock*, with an integrated support.  The stock may need to be pushed in (gently) or possibly given a light twist to break the internal part free, so it can slide in and out. 

*The stock will only extend if the printer and slicer material profile is dialed in, otherwise it may end up fused. It took about a dozen test prints to get the telescoping stock working right, and my printer is pretty decently dialed in. If it does seem a bit stuck, sometimes giving the stock a light twist back and forth can free it. But if it won't pop in or pull out with a modest bit of effort, it's fused, so enjoy your SMG static model, and forget I mentioned anything about an extendable stock.

Thanks to Soozafone for the awesome Dummy 13 model, which these weapons are designed for.

Dummy 13 Weapons Packs:

V1.0 - Shotgun, Handguns, Holsters and Katanas

V2.0 - MP5SD, MP5K's, Handguns, Holsters and Katanas

V3.1 - Halo/Sci-Fi Inspired Rifle, Handgun, Shotgun and Machetes

V4.0 - Star Wars/Sci-Fi Inspired Rifles and Pistols

Note - if you see these for sale on Amazon , Etsy or anywhere else, they are not being sold with my permission.  There are no "authorized" sellers of these models.  They were made for the 3D printing community, not for Amazon or Etsy sellers to profit from.

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here on Printables, to see what new stuff I post.  If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking, and have a Happy Holiday!

Change log:

7/9/2024: Uploaded version 3.1