Tornado, One Punch Man - HueForge

Tornado - HueForge

Please enjoy this HueForge print of Tornado from One Punch Man.

I would really appreciate any and all feedback and would love to see some comments/pics of your prints, especially if you change the colours or remix!

Make sure to print as below:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA Kingroon White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to BambuLab Green
At layer #17 (1.44mm) swap to White for the rest.