Saitama, One Punch Man - HueForge

Saitama, One Punch Man - HueForge

I noticed a severe lack of Saitama love on here so I made this, the photos don't do it any justice, it's much better in person!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA Kingroon Yellow Transmission Distance: 5
PLA Kingroon White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest.