Lulz Bot Mini 1.04 Revo Micro and Sherpa Mini Extruder Mount

Hotend Mount for the Lulzbot Mini 1.04. Uses Revo Micro, Sherpa Mini Extruder, BL Touch and EBB42 Canbus, with 4010 part cooling fan. Also updated the mini to klipper and added a screen. Bl Touch, EBB42 and Sherpa Mini are self threading M3x10mm machine screws. M3 inserts are used for the Fan mount and can be optionally added for the extruder mount on the bottom side. M5 are used to interface with the mini's X carriage. EEB42 needs m3 nylon spacer to have bottom side component clearance. Used M2x10mm machine screws on 4010 fan mount. I modified the Mini's X carriage Wiring cover to remove the bottom section in prusaslicer.

Using this 4010 fan shroud:

https://www.printables.com/model/573095-fan-duct-45-degree-angle-4010

M5 inserts:

https://a.co/d/dq2imXK

M3 inserts:

https://a.co/d/e728bvJ