Kingrinder - Coffee Handgrinder Support

I printed this support for my Kingrinder K4 because it is not very stable and I was afraid of damaging my coffee machine or to drop the grinder itself. 

It can be scaled to the diameter of your handgrinder easily in your slicer and with some easy modifications on Tinkercad or Fusion, you can remix to add more slots for other grinders, something that I may do in the future…

I printed this one in PLA from Sovol, using a Sovol SV07 Plus, Cura slicer, 190 degrees, 75 degrees bed temperature, no brim, no supports. Other configurations I used: 0.2mm (fine) but I think you can use 0.3 with no major issues; speed 250 mm/s; acceleration 8000 mm2/s; fan speed 60%; infill pattern: grid; 15% infill density. Wall ordering inside to outside.

I also made a video with some of my 3D prints, in Portuguese, with time stamps, where you can see how I'm using them: 

PS: configurations above worked in my first try and I didn't try to optimize for speed or less material, but you can give it a try.