Eldritch Horror Card Storage Organiser

This is an insert to store cards for Eldritch Horror.  It's designed to be used in a large Eldritch Horror expansion box.  I assume you can print one of the many other organisers for the base box, for tokens and standees etc.  This one focuses on storage of expansion cards.  There are two small token trays to help fill space.

Print the following quantities:

• Eldritch Horror Card Box - Full Length, Normal Cards x 2 or Eldritch Horror Card Box - Half Length, Normal Cards x 4
• Eldritch Horror Card Box - Half Length, Small Cards x 2
• Eldritch Horror Token Tray - Half Length x 2
• Eldritch Horror Card Separator - Normal Cards x as required

The full length box was too big for my plate, so I made a smaller version.  There is no box lift.  The trays fit cards sleeved in Gamegenic sleeves.  The small ones are mini-american.

The token tray has a filet around the bottom to make it easier to draw tokens.

Designed in Tinkercad.  

Printed on a Bambu P1S using the Generic High speed PLA profile at .2 layer height with a .4 nozzle.  Actual filament was CC DIY PLA blue.  It's an Australian brand.

In the picture you can see I've yet to unbag and sleeve some of the cards.  The cards lie horizontal.  I may add some dividers when I work out what I need.  I ran out of blue so I had to print the last box with a different reel :/