self watering tool - well designed - water tight no sealing needed - PET bottles

This is a well designed watering helper for plants. It comes with different watering pipes, to adust for you're plant.

• the pipes have different diameters (from 0,4 mm to 1,4 mm)
• the pipes are screwed to the cap and water tight
• no support needed, the pipe is separated, to print without support
• the cap fits to a standard PET bottle
• the cap does not need a seal
• the cap is water tight

You need to try the best diameter pipe for each plant, it mainly depends on the potting soil, not the size of plant.

I print this usually with PETG, but other materials will be fine too.

For the pipes I recommend to use a brim.

For PLA I recommend astrong brim

Best to print each pipe separately, because they are thin an height.

Print Settings

Rafts:

Yes

Supports:

No

Resolution:

0,2

Infill:

10-30

Filament: Das Filament PETG/PLA