Flexible Case for Samsung J7 Sky Pro

This is a phone case I designed to fit my Samsung J7 Sky Pro, so it probably won't fit much else. It also requires flexible TPU filament.

This is an older design of mine, imported from Thingiverse.

Notes:

My filament wasn't as rubbery as I'd prefer, so I printed mine with 1 perimeter, only 3 top/bottom layers, and only 16% infill to line it up with the corners. And that's to make it as soft/absorbing as possible, which of course gave me a few surface holes in my print, but luckily thanks to how it's designed, they're hidden once you put the phone in it. lol
You may want to use 2 perimeters walls, and maybe 4 top/bottom or 4/3. And maybe 20% infill. Especially if you have something very rubbery to print in, those settings should be ok.

And of course with flexibles, it's best to have retraction mostly off, and avoid crossing perimeters on.. So just FYI, with this print you will still see some strings hanging off the print, but they're easy to clean off. Any blobs inside the Port-holes can be easily pulled out with something like a tweezers/needle-nose pliers or snips.