Star Habit Counter

A habit tracker to track 5 (or 7) successful tasks.  If you did the habit that day, flip the insert to indicate success!

So far the kids are doing better on their habits than myself…

Usage Notes

• Some variants of the Case Back are provided for different sized magnets.
• If you're using double-sided tape or a magnet-sheet, the “unadorned” case is easier to deal with.
• Use CA glue or epoxy to glue the case halves together; the lip should provide good alignment. Alternatively, you can try heat-welding…
• The plain insert can be nudged up via the star-hole, then grabbed. If that's not to your liking, the insert-with-lip may be more to your liking.

Printing Notes

• Print the Insert with a color change midway through.
• I've personally done this with PLA, 0.4mm nozzle, 0.2mm layers.

Remixed to provide a solid way to put the case together. While it now requires glue (or heat welding), it's more reliable to put together.

While I was rebuilding this, added some tiny detail tweaks – fillets and chamfers, recesses for magnets, etc