Watering can / pitcher / vase
Solid watering can / pitcher to be printed in vase/spiral mode. Watertight if printed correctly, fully scalable!
6
45
0
199
updated
January 4, 2024
Description
PDFThis vase has to be printed in VASE MODE ore FAKE VASE MODE. Settings I recommend:
- vase mode (or fake vase mode with 0% infill)
- no top layers
- 5 solid bottom layers
- extrusion width 2x nozzle size (0.8 mm for 0.4 mm nozzle)
- 50% speed reduction
- Extrusion multiplier / flowrate 120% for the bottom layers
- Extrusion multiplier / flowrate ≥100% for the upper part
- Limit or disable retraction/pressure advance
My YT channel episode on mastering watertight prints https://youtu.be/xLQYteNuwgQ
Tags
Model origin
The author marked this model as their own original creation.
