Voron compatible Prusa X carriage Remixes

It will protrude about 4mm in front of the initial position of the mk3s nozzle. Also, the nozzle position may be about 1.8mm higher.

BOM : 

• two LM8LUU bearings
• seven heatset inserts, the same kind that is used on all Voron parts (M3x5x4)
• three M3x50 screws
• two M3x10 screws

CAUTION

The insert nut and bearing will interfere, so you will need to file it down after installing it.

After printing this MOD, processing such as cutting off the interfering parts is required to match the actual product.

You may need to modify this MOD yourself.

I made it thinner