HSW - LED Light Strip Mount

Add LED lighting to your Honeycomb Storage Wall.

Made to work with this extruded aluminum channel from amazon ($15.99):
https://www.amazon.com/dp/B09YY281KP

The channel should just snap right into the holders. I used one holder per channel segment. I wound up need 3 channels to span a Honeycomb Wall that was 4 honeycombs wide.

Use the channel clips to secure one section of channel to another. 

You will need the following for each stem you print:

• 1 x M4x12 socket-head screw
• 1 x M4 hex nut
• 1 x M4 insert from the Original Honeycomb Storage Wall

You can use any LED strip you want, but this is what I used in mine ($10.99):
https://www.amazon.com/dp/B08HD3ZSQV

Made to work with a particular LED Channel.