Whetstone guide
Whetstone guide for a 20 degree grind angle. Fits whetstones as 103 x 32 x 6 mm. Scale in slicer as necessary.
12
58
0
736
updated
August 19, 2024
Description
PDFThis model is for a whetstone guide of 20 degrees grind angle. The model is made to fit a 103 x 32 x 6 mm stone.
The example is printed in PETG.
0.1-0.2 infill
Print without supports. The sled is best printed on its rear end.
Edit: If needed, scale everything with maintained ratios.
I hope you will enjoy and put the model to use!
Tags
Model origin
The author marked this model as their own original creation.
