It is a replacement for broken curtain hangers in my shower. Dimensions 55x35mm and 6mm in diameter.
Attached files: Fusion 360 project (.f3d), Prusa project (.3mf) and STL.
Printed with PLA and it seems to be flex enough for the purpose.
Sink them 2 or 3mm inside the print bed for better print results (adhesion, first layer stability). If you use Prusa Slicer, the hanger should be already properly sank below print bed level.
For Prusa 3.5S owners: just grab the .gcode file to print PLA six-pack of hangers.
white PLA https://devildesign.com/ but you may get better results with PETG
The author marked this model as their own original creation.