horizontal drag chain ebb36 xol
a horizontal drag chain mount for the ebb36 on a xol toolhead
40
164
2
1831
updated January 5, 2024
Model files
chainedebb36_v6.stl
chainedebb36_pin.stl
sturdy_pin.stl
dragchain_support_3holes.stl
dragchain_support_noholes.stl
ebb36_dragchain_xol_sturdybodyWaschbearedition.stl
drag_chain_bowden.stl
chafeguard.stl
Model origin
The author remixed this model.
Differences of the remix compared to the original
i created these mods with the help of user Waschbear on the voron discord, there are two versions… the one i use and the one he use's. these may need to be scaled up or down due to printer calibration,settings,etc.. ymmv. the mod has been working well for me! although it has changed my Y input shaper graphs quite a bit. i am currently running an xol toolhead with a moons 17mm motor, the brand of my chain is CNWSL 10x11 i got the chain from Mr. Bezos and it seems like decent quality. you will have to use a 6mm drill bit to enlarge the hole in the last link on the slide through pin version
4x voron bom spec heatinsert
1x m3x30 bhcs,shcs your choice!
1x m3 washer
3x m3x6
1x zip tie
2x m5x10 BHCS
2x m5 t-nut