Printed one to count laps at the pool and lost it, scaled it up to 150% rather than re CAD it and printed another one not in black this time. Tolerances stayed good using the tight clip, the numbers are better a little bigger, but the first one I did at original scale was with old PETG.
Printed perfectly first try. Despite the recommendation to the contrary, I used Polyterra matte PLA for the whole thing with no issues. I also used the remix wheels that only click on the numbers and not the half stops. I'm using this to track "bravery points" my daughter earns for good behavior to use on candy, movies, etc.
Very nice design with a satisfying ”click”. Took the liberty to remove every other groove to only click on the numbers. A little lady in the household also thought it looked a bit sad so I added a smile. So thanks for sharing the model and also the step-file.
Love it! Perfect for keeping track of throws at Disc Golf! Thank very much.
Great print, love these counters, the clicks are so satisfying, thanks very much. I did end up embossing the numbers above the surface of the wheels by 0.2mm ( which still fits fine ), instead of having them recessed - as this made the numbers so much more vivid/readable. I used an 'army camouflage' plate underneath, in case anyone is wondering about that pattern. ( I don't post 'makes' normally, but felt this one deserved a thanks to the designer ;-) )
