Prusa MINI Bambu Hotend Mount
A mount to use the bambulabs hotend on the prusa mini, supports clones with variations for v6 and stock nozzles
11
52
2
575
updated February 27, 2024
Description
PDFRequired Hardware:
| Name | Quantity |
| M3 heat inserts | 4 |
| M3 Square nuts | 2 |
| M3x18mm screw (if you use 20mm screw, it will hit the heatsink) | 1 |
| M3x16mm screw (for mounting wire clip. you can use stock screw with spacer) | 1 |
| M3x12mm screw | 2 |
File Selection:
Fitting: There are 3 fitting options: Stock, PC4-01, and collet.
Nozzle: bambu hotend clones have replaceable nozzles, however they're 2mm shorter than a v6 nozzle, if you want to use v6 nozzles choose a file with “v6 nozzle” in the name
Heat-Inserts: this design uses m3 heat-inserts, choose a file in the folder that matches your heat-inserts dimensions
Printing:
Filament: ABS, or PETG
Layer Height: 0.2mm
Wall Thickness: 1.2mm
Infill: 25%
Supports: yes, see image below
Credit:
Tags
Model origin
The author marked this model as their own original creation.
