Sewing Pedal Holder W6 N8000 - Nähpedalhalter

This is a Sewing-pedal-holder.

It holds the sewing Pedal of a W6 N8000.

I 

Version 1 is for Screwing it in and not getting it out (More rigid for Kids in household)

You need 3 Screws:

1 x 70mm (max. 3mm thick)

2 x 35mm (max. 3mm thick)

Its ready to Print (correct orientation)

Version 2 is for doubled sided Tape or small screws 

Use at Least 1cm wide double sided Tape. 

or 

5x 10-20mm screws. (max. 3mm thick)

I havent tested this version, but it should work, also prints without support.

Its ready to Print (correct orientation)