Rapido Collar & Sherpa Mini Combo

My attempt to combine the Collar mount for the Rapido UHF and Sherpa Mini Extruder. Settings below is what I used, please use orig for his intended results. I also included the STEP file. 

• Print Settings:
  • Nozzle size: 0.4
  • Layer and initial Layer height: 0.2 mm
  • Wall line count: 4 (my default)
  • Top/Bottom: 4 (my default)
  • infill: 50% (your discretion Orig Recommends 30-50%)
  • infill pattern: gyroid (your discretion)
• Material: PETG* ( I know not suppose to, but my ASA is late to the party.)

*Original says PLA+ and above EXCEPT PETG.

**NOTE 1: All inserts will be the Same as original model.

The heights are from the top, where the Sherpa mounts, and the bottom where the the Rapido meets. Everything else is the same.