Buffalo Trace Logo

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Inland Military Brown Transmission Distance: 5
PLA Inland Brown Transmission Distance: 5
PLA CC3D Copper Silk Transmission Distance: 5
PLA Inland Sand Transmission Distance: 6

Swap Instructions:
Start with Military Brown
At layer #11 (0.96mm) swap to Brown
At layer #17 (1.44mm) swap to Copper Silk
At layer #25 (2.08mm) swap to Sand for the rest.