Butt Lamp

1. Please print the butt lampshade using vase mode, and it needs to be printed upside down.
2. The base is designed to accommodate an LED light with a diameter of 60mm and a height of 8mm, with a 3mm thick wire. I have designed wire slots in different directions and reserved screw holes at the front and back for flexible placement. The lampshade simply needs to be positioned correctly and gently inserted into the groove.
3. I also designed a support that can be fixed with screws and glued to the wall, requiring M4×20mm screws.

我重新混合了“Butt Planter”并将其变成了“Butt Lamp”。