Vesa Mount Laptop Stand - Macbook Pro (2020) + Hub Holder

I designed this setup because all of the Vesa laptop mounts were too large and boring. I also wanted to find a way to better way to use my USB-C hub without it dangling in mid-air. 

I also designed thick-style knob washers to make it a little more sturdy at the connection point. There are four in the file in case you don't want to print the hub holder.

The Hub holder is designed for typical MacBook universal USB-C hub

The build requires the following hardware:

4 x M4*16 Flat Socket Head Cap Screws

4 x M4 nuts

I printed in PLA and seems to hold up well with .2 layer height and 35% infill.

Enjoy!