Simple Round Lamp

I've created a simple WLED controlled lamp for mood lighting and notifications from my Home Assistant setup.

I've used an aluminium tube to aid in keeping the LED's cool, I used 3 small stick on feet under the lamp to allow air to flow up through the aluminium tube. 

I printed the base, retainer and dress ring in eSUN Black ABS+ and the shade in eSUN White PLA+. There was no specific reason for using ABS it was just what i had loaded at the time. Be sure to print the shade in Vase Mode.

Parts I Used:

• 25mm OD Aluminium Tube 180mm long
• WS2812B RGB LED Strip. Density: 144/Meter (114 LED's used in this model)
• D1 Mini
• 2.1mm Bulkhead Male DC Power Connector (eg. http://tinyurl.com/4wmare84 )
• 5V 3A Power Supply ( I used this one http://tinyurl.com/4c5p85dv )