Nerf Motoblitz Short Dart Pusher

I couldn't find a short dart pusher for the Motoblitz that fit and functioned properly, so I went ahead and created one myself. I've designed it to easily snap into place over the original pusher without needing to do any gluing or modification.

You'll find two versions of the adapter: with a shim at the rear for a slightly tighter fit, and without a shim.

I've tested the adapter with the flywheel cage from BuffdaddyNerf and magazine adapter from Zharathos, both of which worked great!

The part can be printed without supports or reorientation, though a brim could help with warping/adhesion issues.