Galileo 2 EBB SB2209/2240 Cable and Connector Strain Relief with Spring Steel Cable Guide - Original BTT Cable

Print using standard Voron recommended settings for toolhead components.

In true BTT fashion, they quietly started shipping a new CAN cable with the SB2209/2240 kits, with a longer Micro-fit 2x2 on the end. If you have the older version, or happen to get an older version kit in the future, the remix I based this file off of won't fit it because the connector is too short. It is also too wide for the old connector.

This version corrects that (the connector is now as low as it can go before blocking the USB-C port, and covers the top half of the connector) and is also a snug width that just fits the connector. I choose this remix to base it off of because it had both a zip tie point and a hook for the BTT recommended spring steel wire that acts as cable strain relief. 

Speaking of BTT not telling customers things, they don't mention what size spring steel cable in their documentation, just that one is needed (I mean, they even include a picture of how to install it, without mentioning what size it is). I'll save you the trouble - you want .8mm spring steel cable. A .82mm piano wire (the bass lines, naturally) will also work. If you can't scrounge one up Amazon, etc. sell them.