HSK ACE and 4K Modkit (~20g)

The is the second Fingertip mod I've created and I've decided to call these the "Beta" series since I'm still learning a lot as I go. By the end of the year I would like to have finalized versions of the ones I released with all of the strategies I learn along the way. Anyway, here are printing tips.

Printing/Assembly Tips-

     -Print as is, do not reorient the print

     -Squeeze the clicks inwards if there is too much pretravel

     -Silk PLA Gold was my material of choice and when done I hit 19.63g (and it looks good as hell)

     -Leave the scroll wheel in when placing in the first PCB

     -I left all standoffs on but I do not bother screwing in the back screws on the PCB with the clicks on it, only the fronts

     -Reach out to me either here or on anyone of my videos for assistance and I will try and help

     -If you'd like to adjust anything, here is the OnShape link, go wild: https://cad.onshape.com/documents/0f3d446137e3935b8cfb2fa6/w/dab0eeea535fceb5313de53f/e/3f350d103cf2a668601c6fc6?renderMode=0&uiState=6591b89b5531ce75ff44cb76