Wire Guide (Rollup)

The diameter is about 62 mm and the height is about 30 mm.

I printed it on my Ender 5 S 1 with 

0.2 layer height 

15 % infill 

I used an M3 x 18 mm hexagon socket screw and a melting thread.

Maybe you need to expand the holes for the cover plates. 

There are three plates, one with the QR Code to this side ( would be nice if you use at least one of it ;-)

The Second brings you to a Rick Astley Video on youtube 

and the third is empty, so you can use it for your own design.

Enjoy