27" iMac raiser

Wanted to have my iMac a bit higher with the foot of the iMac surrounded, so I made this. Remixed from this part: iMac 27" Tidy Tray by Jimchad on Thingiverse. I was too lazy to do the measuring on the foot contour myself. Jimchad did an excellent job here! 

Should work without rubber feet, but I decided I wanted some.

Printed in ASA, 0.2mm layers, 4 perimeters, solid layers: 5 top/5 bottom, 40% grid infill → Voron settings. Printed with supports. Tried to model it with build-in supports, but it seems that I need more practice here. PLA should also be sufficiant, but I noticed a few degrees temperature above ambient in the iMacs foot, so I went for the safer option.

Fits onto a Prusa MK2/3/4, but was printed on my Voron 2.4, given the chosen material.

Lowered surrounding to be flush with the front of iMac stand, added height downwards, added some holes for rubber feet → Attention here: I only had 2 different variants of feet at hand, therefor the holes have different diameters and depth.