Fysetc 1284mini LCD display mount

Mountable display cover for the mini1284 control. Uses 2 M4 flat head screws to mount on any vertical surface. Screws are slanted to increase grip on an Ikea Lack or similair. There are multiple hardware setups for reset microswitch, let me know if you need me to tweak the design to accomodate for those. Rendered version is of my specific cover with embedded text, but I have also uploaded a version without the text. I have also printed the button inner insert out of translucent filament because of neopixel led events. Backlid is a friction fit and hasn't been properly tested yet. Let me know if it does not work for you, will make changes if necessary. Print Settings

Rafts:

No

Resolution:

0.2

15%

Filament: generic PLA

Notes:

Resolution and infill should not matter, however 0.2 gives a nicer result on the large overhang