Modular tray to let dish appliances and cutlery drip of. Designed to sit on the edge of the sink so the water can drip back into the sink.
Currently the parts are designed that you need exactly one of each.
Height of overhang: 4,6 mm
Depth: 19 mm
Print instructions:
Any Material should work just fine. I used PLA.
No special adjustments need to be done.
The baseplate needs support structures.
Depending on the orientation when printing i recommend using an adjustable layerheight.
So the ramps for the water will be smoother.
The author marked this model as their own original creation.