Desktop Death Star Clock

This is a 56% reduced Death Star clock face suitable for a desktop. I designed a minimalist hour and minute hand for this size of clock face. I also designed a stand to hold the clock on a flat surface.

The hands are printed in PLA+, 0.4mm nozzle, 0.20mm layer height, and 4 perimeters. The center hub hides the clock shaft and is printed in vase mode. 

The clock face is printed in two colors of PLA+ on the XL, 0.4mm nozzle, 0.20mm layer height, 2 perimeters, and 12% Grid infill.

The clock stand parts are printed in PLA+, 0.4mm nozzle, 0.20mm layer height, 3 perimeters, and 15% Grid infill.

Edit: For more of a permanent base, you require two (2) M2.5x16 socket head screws to secure the supports to the base.

https://www.tiktok.com/@bd4307/video/7318593053793520901?is_from_webapp=1&sender_device=pc&web_id=7258866176834569734

Scaled clock face down 56% of original to make it a desktop version.