Frank 2.0 Satsana Nozzle Remix V2

Hacked together a nozzle from a 5015 satsana to use with the Frank2.0 modular ecosystem.

4 versions:

• OG is basically a satsana5015 nozzle but hacked on to the Frank2.0 system. 
• Turbo is a narrower nozzle that focuses more closely on the nozzle. Most every surface of the nozzle has been tweeked. 
• There is a variation of each that is 2.5mm longer (in the Z). I made these because my nozzle isnt where its supposed to be. Yours may not be either. I believe there is a mistake in the CAD i based this off of. I would recommend the 2.5 mm version first. 

THERE SHOULD BE 3.8 mm of clearance between the nozzle and bottom of the duct. Lots of room. Let me know if you'd like a variant at a different height. 

https://www.thingiverse.com/thing:4697079
 

https://github.com/kevinakasam/FrankEnstein-Duct/blob/main/Frank2.0_Beta/STL/Fans/Partcooling/5015/5015Duct_Left.stl