Bowden Guide/Support for K1 MAX
This an alternative version. Adapted from another contributor.
53
627
2
2490
updated December 30, 2023
Model files
k1_bowden_support.stp
k1_bowden_support.stl
Model origin
The author remixed this model.
Differences of the remix compared to the original
I put the support on an angle and added a recess in the base. Some designs, the chain support may hit the tall support when the print head is at 0,0. Also the chain support if it sags could hit the base, so I added lower section so it does not hang up when at 0,0