Magswitch Featherboard Original Extension

This is an extension to upgrade the origal magswitch featherboard to make it more like the latest version.

Printing

I used 5 perimitters and 5 top & bottom layers with 15% infill - printed on Prusa Mini+

Parts & Assembly

1.  All you require is two ¼-20 inserts and 2 bolts screws of whatever length you require.
2. Heat the inserts slightly with a heat gn and screw them into the body til they are flush.
3. Use your prefered glue to attach to featherboard.
4. Screw in your screws (could use a plain nut to lock them in position if required)