Home is where the Prusa is.

Hello all. Does your home feel like it's missing something? Is your 3d printing work area bland & boring? Do you Love Prusa? Well if any of these are true, or even if they're not, you should download my Home is where the Prusa is sign, print it & about 9h10m later hang it on your wall then sit back and smile because you just printed something awesome. 

This is a wall art piece I recently designed & printed. It started off with a heart image but my true heart told me it needed something else. So back to Tinkercad I went and designed an i3 MK3S silhouette. I think the final result is pretty cool and worth sharing for everyone to enjoy. 

I have included the original .stl file as well as the .gcode I printed mine with. 

There is a hole centered on the back top so it can go right from your print bed immediately up onto your wall. 

Settings I used & in the .gcode:

.4 mm nozzle

 .15 layer height

6.35 mm brim

Octagram spiral bottom pattern 

2 walls

10% infill, Rectilinear 

Elephants Foot compensation set to 0

Print time is 9 hour 10 minutes 

Color changes at layers 79 & 85

I did mine starting with white, then black then orange. 

Thank you for checking out my design. I hope you all enjoy it. 

Happy Printing.