Christmas tree with base Decoration Version 01 (with hanger for Christmas balls/decoration), vánoční stromek se závěsem na vánoční kouli

Christmas tree with base Decoration

The scale of the tree is made according to the intended used Christmas ball with diameter 60mm.

The wall thickness I usually use is 1,5mm which is enough to be stable by using 60mm Christmas ball as pendant within the tree. 

You can download the Tree in two thicknesses, 1,5mm and 2,0mm.

You can download the Tree Base in three sizes and according to the Tree trunk in 1,5mm or 2,0mm (sometimes you would need the bigger size of the base to make the Tree more stable, according to the used pendant within the tree).

Usually used Print Settings:
Material             PETG (PLA)
Layer height      0.2 mm
Infill                    20%
Supports           None
Brim                   None

Other Versions:

Version_01

https://www.printables.com/cs/model/698664-christmas-tree-with-base-decoration-version-01-wit

Version_02

https://www.printables.com/cs/model/700066-christmas-tree-with-base-decoration-version-02-wit

Version_03 (A and B)

https://www.printables.com/cs/model/700080-christmas-tree-with-base-decoration-version-03_a-a

Version_04

https://www.printables.com/cs/model/700096-christmas-tree-with-base-decoration-version-04-wit