Servo Tester Case - Easy Print

Tried the others, but they would not fit the servo tester I received. The others were not easy to print the text. So I made a new one that prints text mid layer (with a spool swap). Enjoy!

Screws are 2.5mm hex bolt

Category: 3D Printing

(ADDING A CAPACITOR)
I was having an issue with my servo tester not working with larger servos.  Buttons would just flash and would not work.  I added a 470uF capacitor to the input line.  Fits perfectly in the 3D printed case.  Solved all my servo issues.  Works perfectly now.  See Photos.