Heewing T1 Ranger or T2 Cruza Pan Servo mount for DJI/others

Fits the full DJI original camera and the O3 camera. May fit other cameras too.

This was designed for the T1 but it fits the T2 perfectly too.

Just a simple design for a front vent cover pan servo mount. The pan servo screws into the mount at an angle for better forward viewing.

Cut out space for the servo below the cover. Glue in the cover. Cut slits for the camera wire and antenna. Glue slits closed.

The air unit (03 or Vista) fits in the space beneath and gets airflow through the available vents.

I'm including two versions for different servo tooth patterns. Find the one that fits your servo (hopefully). You may need a longer screw to attach it. There are more versions that fit a caddx peanut which you can find here: https://www.thingiverse.com/thing:5408692

I really like the GDW RS0708 servos that come in 180 degrees to 350 degrees. Get the 350 degrees (NOT the 360 degrees) to see behind you. 360 will just rotate all the way around which is not what you want.

https://www.aliexpress.us/item/3256802864566381.html?gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US

Category: R/C Vehicles