Nano Drak DJI O3 Nose Mount with Pan option

Remixed my old original DJI air unit mount for the Nano Drak to work with the O3 camera and air unit.

There is a short and long version. If you are cutting a fresh nano drak, use the short version. If you already have a mount in place you may want to use the long version because it will fit your existing cut better.

Printed in PETG at 20% infill. But TPU works well too. Don't print with full supports or it will fill in the zip tie slot. Use custom supports like in the picture.

If you use a servo for pan, most similar size to the GDW will fit with the tabs cut off.

GDW is this one (get the 350 degree one!): https://www.aliexpress.com/item/3256802864566381.html?spm=a2g0s.12269583.0.0.57771590yReQPG&fbclid=IwAR2CLxwAxLrL3t_eKu5nk4OzM42M_r2BWcJPJS6LFHVLyOOzJGoGpsc8sOA

The SG90 fits various other servos like this one; https://fpvdogfight.com/products/motionsic-check-six-custom-servos

One of those two likely fits lots of servos