This print might get redesigned in the future to support swappable plates for Chocs, MX and Kailh Box switches each.
This is a lubing station for Kailh Choc V1 switches. It has places for stems and bottom pieces, and two bowls for the springs and top pieces.
The bowls can be printed supportless, depending on the bridging capabilities of the printer.
The sidepiece design is loosely based on this MX lubing station by fonz79
Included is the STEP file so you can change elements to your liking.
Also included are STLs for testing the different features of the print separately.
0.2mm layer height (the correct layer height is especially important for the supportless bowls)
Enable “Detect bridging parameters”
Print face down
Choc Lubing Station Body Supportless | The lube station body, with supportless bowls |
Choc Lubing Station Body | The lube station body |
Choc Lubing Station Sidepiece Left | Left sidepiece, to be clipped into the body |
Choc Lubing Station Sidepiece Right | Right sidepiece, to be clipped into the body |
Choc Lubing Station Supportless No Sidepiece | The lube station body without sidepieces and supportless bowls |
Choc Lubing Station No Sidepiece | The lube station body without sidepieces |
Minimal Choc Lubing Station | Minimal version of the lubing station |
Choc Lubing station prongs insert v2 | An insert for the stem places with prongs that fit into choc stem openings. Might need to be glued in |
Choc Lubing Station v14 | The STEP file for the lubing station |
Test Supportless Bowl | Testprint for the supportless bowl feature |
Test Sidepiece Body | Testprint for the body part the sidepiece snaps into |
Test Sidepiece | Testprint for the sidepiece to snap into the body |
Test Choc | Testpring for the Choc stem and bottom holder |
Test Bumpon | Testprint for the Bumpon feet and the overhangs |
The author hasn't provided the model origin yet.