Motherboard Mount

test bench/motherboard tray to put in heat-set inserts then motherboard standoffs to mount itx/matx/atx motherboard on. Bottom ⅓ fits in the top ⅔ and arrows point at each other so you know the correct orientation

Size: 

1. top: 237mm x 185mm x 10mm
2. bottom: 237mm x 115 x 10mm

Instructions:

1. print
2. don't pull it off the bed immediately lol
3. have 13 heat set inserts and motherboard standoffs ready
4. use soldering iron to press the HSI's directly into the 2 pieces
5. be happy you have the thing and rate me if you like it

disclaimers:

1. All measurements in picture are in millimeters 
2. The picture is not the drawing of the tray itself, it is just measurements of the holes and distance between them for atx-itx motherboards