Lightsaber Holder

Design notes:

• 200 x 35 x 67.5 mm (L x W x H).  The height is in the printing orientation (it's also the distance the holder stands out from the wall).
• Screw mount version (this is what's shown in all provided pictures):
  • Designed with counterbores for #8 x 2" Kreg screw heads.
  • The screw caps push tightly (almost snap) into the screw holes to provide a flush finish hiding the screw heads.  They have a slight taper to help with installation.  The screw head side has a tiny hole as a visual reference to help get the orientation right for the taper to help during installation.  The screw head side is intended to be the print bed side of the cap.
• Option provided with no screw holes to mount with double sided tape.  I haven't tried this install method, but with the right amount of tape for the weight, it should work well. 

My print:

• 0.4mm nozzle
• 0.2mm resolution
• 20% cubic infill (applicable for the main print; not applicable for the screw caps that were printed solid except for the designed in hole)
• No supports
• Filament: Hatchbox Dark Green PETG