Dodgers LED Sign

This is a dodgers logo C-channel LED sign model. The model is broken up into small enough pieces to fit most print beds.

Printing

• 0.2mm layer height
• Supports enabled for LED cap
• ABS or PC for outdoor use

Mounting

• One screw hole is available above the A. Additional screw holes can be drilled in throughout the space between the C-channel if desired

LEDs

• The C-channel width for the LED strip is 6.2mm
• I used these diffused LEDs https://www.amazon.com/gp/product/B0BRBFW77R . 
• I did not have to glue the LEDs in, they were able to stay in with tension.