Hogwarts School of Witchcraft and Wizardry

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Transmission Distance: 4

PLA BambuLab Basic Yellow Transmission Distance: 6

PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

Start with Black

At layer #3 (0.32mm) swap to Blue

At layer #4 (0.4mm) swap to Yellow

At layer #5 (0.48mm) swap to Jade White for the rest.